Audi VW mount power windows / Fensterhebermotor - Free 3D Print Model

Search models, users, collections, and posts

Roofus

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 100% infill

Designer

1.6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

German	English
Holders for electric window regulators. For all classic vehicles from the 1980s retrofitted with electric windows (e.g., from “in.pro.”). Not limited to Audi (coupe, quattro) and VW (Golf/Scirocco).	Holders for electric window regulators. For all classic vehicles from the 1980s retrofitted with electric windows (e.g., from “in.pro.”). Not limited to Audi (coupe, quattro) and VW (Golf/Scirocco).

German

After four decades, window regulator brackets frequently exhibit significant deterioration, threatening structural failure and potential damage to the entire mechanism.
This often impacts original retrofit kits, given their comparable age.
Virtually every 1980s vehicle could be retrofitted with electric windows using this kit.
The company “in.pro.” is defunct.
Determining compatibility with individual vehicles necessitates independent verification, as variations in models appear to exist.
3D printing
- Nylon is the recommended printing material, closely approximating the original material's properties and mechanical behavior.
- Following numerous unsuccessful attempts, optimal results were achieved utilizing an engineering plate and a 20mm brim, preceded by application of 3DLAC adhesive spray to the print bed. Nylon adhesion to the print surface presents a significant challenge.

English

After four decades, window regulator brackets frequently exhibit significant deterioration, threatening structural failure and potential damage to the entire mechanism.
This often impacts original retrofit kits, given their comparable age.
Virtually every 1980s vehicle could be retrofitted with electric windows using this kit.
The company “in.pro.” is defunct.
Determining compatibility with individual vehicles necessitates independent verification, as variations in models appear to exist.
3D printing
- Nylon is the recommended printing material, closely approximating the original material's properties and mechanical behavior.
- Following numerous unsuccessful attempts, optimal results were achieved utilizing an engineering plate and a 20mm brim, preceded by application of 3DLAC adhesive spray to the print bed. Nylon adhesion to the print surface presents a significant challenge.

Comment & Rating (0)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.