Ever since I have installed these they have worked great! Make sure that you don't put them too close to the end of the line, or else it'll kink up and not have smooth flow into the top of the block. Remember, it's like a train track, sharp curves will cause excessive wear and eventually damage - you want a broad loose sweeping fluid movement - not tightly bound and rigid 

nikkolaus

0.08mm layer, 3 walls, 100% infill

Easy to print, I used Geetech PETG I had laying around.

Don Manfredo

4x PTFE Cable Chain Clip (ABS)

4x PTFE Cable Chain Clips (ABS)

where'd you find the elbow going into the head?  b that's the last little bit on mine that's hitting the glass

tc1978

herzlichen dank für das teilen gedruckt mit ABS

Rolf_T

PLA 5x Clip per Clip ≈3 Min 0.2mm layer

dedes

Typuct

Eastrise

3d Printing Stuff

Tommy Cederlund

Ronco67

3D Art

cover

IMG_7569.jpeg

plate_1.png

2024-08-03_599850cb8ccc48.jpeg

DesignerToast

2024-08-11_2fa300c69959a

Sparco

IMG_3850.JPEG

Standard (4,5mm)

+3mm (7,5mm)

plate_2.png

+5mm (9,5mm)

plate_3.png

Alle Varianten

plate_4.png

Michas Technik Wiese

2025-09-23 11_33_19-250923_gemessen.pptx - PowerPoint.png

Verschiedene Höhen des Original-Modells. Folgende Höhen sind enthalten:  4,5 mm (+0 mm) Original / 7,5 mm (+3 mm) / 9,5 mm (+5 mm). Die Maße beziehen sich auf den Abstand der Kabelketten-Auflage zur Bohrungsmitte.&nbsp;Intention Ich habe für meine PTFE-Führung am Werkzeugkopf eine höhe Version benötigt, damit der PTFE-Schlauch mit einem größeren Radius in den Werkzeugkopf eingeführt werden kann.&nbsp;DRUCK-PARAMETER layer-height: 0,12mm walls:  3 infill: 100% colors: 1 color AMS required: NO Support: NO

Different heights of the original model. The following heights are included: 4.5 mm (+0 mm) Original / 7.5 mm (+3 mm) / 9.5 mm (+5 mm). The dimensions refer to the distance from the cable chain support to the center of the bore.&nbsp;Intention I needed a taller version for my PTFE guide on the toolhead so that the PTFE tube could be inserted into the toolhead with a larger radius.&nbsp;PRINT PARAMETERS layer-height: 0.12mm walls: 3 infill: 100% colors: 1 color AMS required: NO Support: NO &nbsp;

Different Heights - 0.12mm/ 3 walls/ 100% infill

Neuer Adapter für den PTFE schlauch.So ist die Abnutzung durch reiben des PTFE verringert.&nbsp;Viel Spaß damit

Print Profile(4)

Description

Comment & Rating (490)

License

Remixes (1)

Related Models

PTFE Cable Chain Clip P1P,P1S, and X1C