Search models, users, collections, and posts
92mm PC fan vent/duct adapter - 4 inch
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
1.9 h
2 plates
Open in Bambu Studio
Boost
172
432
27
7
402
188
Released
Description
I printed it for my noctua 92mm fan so I can connect it to a 4 inch vent/duct. This model doesn't need any support. I tested fitting on my Noctua NF-B9 redux-1600 PWM.
There are two models. One marked “4 inch vent adapter” is what you want to print if you want both sides to be connected to a 4 inch vent.
The other model “connector to adapter” is only useful if you want to chain it up with first model itself. For example, you can chain multiple fans up this way. Make sure you select the right model to print.
To be able to install it on the fan, you can use M3 bolts/nuts or even M4. The diameters of the holes are 4mm.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (27)