Search models, users, collections, and posts
Hueforge El bueno el feo y el malo
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
18
29
10
11
21
7
Released
Description
Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 106.46x149.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3/ Negro Abadia
PLA smatfil rojo Transmission Distance: 2.3/Rojo Printalot
PLA smatfil amarillo Transmission Distance: 5.8/Amarillo Sakata
PLA PolyLite White Transmission Distance: 5/Blanco Printalot
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to rojo
At layer #16 (1.36mm) swap to amarillo
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (10)