Bullnose Baseboard Corners - Free 3D Print Model

Search models, users, collections, and posts

BelliC

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.6 h

2 plates

5.0(5)

Open in Bambu Studio

Boost

Released

Description

Our new home has bullnose corners and I wanted the baseboards to fit that rounded edge perfectly. To do that, I designed these baseboard corners to the same dimensions as the baseboards we are using, with a rounded corner to fit against the bullnose corner of the wall.

Two models are included; one with flat ends that butt up against your baseboard cuts, and a 45 degree angle ended model which would allow your baseboard to hold the printed corner in place when the baseboard is cut at a competing angle.

Comment & Rating (10)

@klandersnitrox

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Had some torn up Buttnose corners and needed something to use as a trowel to even put on the spackel. This ended up working perfectly. You could add this as a butnose trowel tool :)

@klandersnitrox

Boosted

Thanks for making this. Ended up using this as a trowell to fix damage on our Bullnose corners. Worked perfectly. You save me a ton of time. Thanks so much

(Edited)

@finnwii3d

Print Profile

0.2mm layer, 2 walls, 15% infill

printed fine

@Djzman

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@BelliC

thanks for the boost!

@Tweek05

This looks like it will work pretty well for my corners on my 1x4 PVC. My only question is, would it be possible to resize the thickness to 3/4" or 19.05mm? I tried resizing in the slicer, but that changes the total dimensions of the "square" not the wall thickness. Thanks

The designer has replied