Greenhouse / Glasshouse twist clip

Here is a Greenhouse twist clip that I designed to fit the U-rails in my greenhouse for running wires or supporting plants. I have tested these to 9.5KG but imagine they will hold more if your glasshouse is strong enough. I have made 3 variants to fit a U-rail width of 10-11mm they measure 10mm, 10.5mm and 11mm across the insert tab.

There are 7 plates in total, the first is a test plate with a clip of each size which are labeled so you can identify the size required before printing.

I recommend printing these in PETG with a brim, my setting are in the pictures and orientate to the bed as shown in the model and print plate picture.

Plates:

1: test plate with one of each size

2: 1 x 10mm

3: 6 x 10mm

4: 1 x 10.5mm

5: 6 x 10.5mm

6: 1 x 11mm

7: 6 x 11mm

Thanks for looking, if you like my work please boost, like, rate or comment. You can check my other models HERE