Foregrip - Free 3D Print Model

Search models, users, collections, and posts

KP design

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 25% infill fUZZY

Designer

1.7 h

1 plate

4.8(80)

Open in Bambu Studio

Boost

739

1811

114

116

1.8 k

1.1 k

Released

Description

Angled foregrip for picatinnyrail.

Use 5x30mm hex

0.4mm nozzle, 6 walls, 25% infill.

Fuzzy skin 0.4 distance and 0.5 thickness.

Comment & Rating (114)

@danzbo

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill fUZZY

I printed two of them and they fit perfectly. I used PETG. Thank you.

@LiaminationX

what screws did you use for the foregrip?

@danzbo

Boosted

Replying to @LiaminationX :

I only had M3x30, so I modified the model to have a smaller screw hole (in the slicer) and shortened the screw. I later enlarged the hole and put a larger screw.

@LiaminationX

Replying to @danzbo :

ah ok thank you

@user_1463729303

way too short; this grip only fits 3 fingers max. Waste of time and resources

@abgersaurus

Boosted

well to be fair these types of grips are meant to have you grab around the front guard with your thumb and have the remaining 3 fingers rest on the grip.. :-)

@IdoKaplan

someone doesnt use guns

@user_1463729303

Replying to @IdoKaplan :

you must have tiny trumpo hands

@Joeyprairie

looks great with a dual color just couldn't find a screw.

@user_2832648339

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill fUZZY

printed with elegoo petg

@user_832562981

Boosted

love it on my nerf gun

@user_125027469

Print Profile

0.2mm layer, 6 walls, 25% infill fUZZY

I find it perfect, simple, comfortable, and lightweight I haven't tested it in gameplay yet

Show original

@DrTacetee

Boosted

The layer above the main supports came out with spaces between the extrusions. Otherwise it printed perfectly. The texture is nice, though it seems to hold onto small particles of debris pretty easily. Supports were slightly tough to remove, but I figured it out with some needle nose pliers. Once the rail supports were out, the screw/nut supports twisted right out. Fit just right onto two different rails. I just got a p1s as my first printer and this was one of my day-1 prints yesterday. Any advice on the extrusion above the supports is appreciated. I was using the basic pla that came with my printer on the orange one pictured. It wasn't dried prior to use, but I've got a dryer that I've used on other filament that arrived today and will be printing some more for my range buddies.

@bundus

Print Profile

0.2mm layer, 6 walls, 25% infill fUZZY

Printed in PETG-CF and has survived a few skirmishes and counting. Top notch design.

@Profloor

perfect! thanks!

@darimary103

Print Profile

0.2mm layer, 6 walls, 25% infill fUZZY

Excellent profile, it fit perfectly and the quality was superb, even printing at high speed. I'll soon reprint it at normal speed in black, but I wanted to test if it would work with a filament I don't use very often

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Foregrip Mag Carrier

QwermMakes

747

468

AR15 Foregrip 13 - Picatinny

hottr

6.5 k

2.2 k

Shade Vertical Foregrip: Monolithic version

jahnj0584

1 k

249

Keymod Angled Foregrip

jzeltman72

608

216