Ion Titan

这是DenalCC1010在Blender中制作的3D模型，我在Ion Titan (Laser Core Pose) Model by DenalCC1010 by HyperV1per - Thingiverse发现了这个，最初链接： https://sketchfab.com/models/a243bff5fa2e417091e4e34bc70c9764觉得很帅气。但是原始文件零件细节过于丰富以至于难以打印，关节连接处也十分脆弱。

所以我对胯部、膝盖、脚底板等地方做了调整，并对一些地方进行了降速打印处理。

请注意！

在你准备打印之前，请看第一张图的支撑，拆支撑将是地狱一般的过程。仅推荐哑光PLA进行打印，其他材料使得拆支撑近乎难以成功

如图所示，尽管我十分小心，但是还是失去了很多细节。考虑到有人可能有更棒的拆除技巧，所以我并没有去掉这些细节。

Here is a 3D model of DenalCC1010 made in Blender, I found this in Ion Titan (Laser Core Pose) Model by DenalCC1010 by HyperV1per - Thingiverse, originally linked: https://sketchfab.com/models/a243bff5fa2e417091e4e34bc70c9764 think it's handsome. But the original file parts were too detailed to print, and the joints were fragile.

So I made adjustments to the crotch, knees, soles of the feet, etc., and slowed down some places.

Please note!

Before you're ready to print, take a look at the first picture of the support, it would be hellish to remove the support. Only matte PLA is recommended for printing, and other materials make it almost impossible to remove the brace successfully

As you can see, despite my care, I lost a lot of detail. Considering that someone might have a better demolition technique, I didn't remove these details.