portuguese tiles planter

Search models, users, collections, and posts

h3li0

Household>Decor

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

a1m

Designer

5 h

3 plates

5.0(9)

x1c

Designer

5.7 h

2 plates

4.8(5)

Open in Bambu Studio

Boost

149

384

178

Released

Description

squared with traditional tile design inserts

modern minimalist planter design inspired in traditional portuguese tiles that sits elevated in a plate

full dimensions in mm ~ x:100 · y:100 · z:100

included are the profiles for both X1C and A1mini
0.2mm layer height
10% cubic infill

after printing all components, the tile inserts slide into place, and then you finish by also inserting the caps.

notes

the tolerances for the inserts are very tight, so that no glue is needed and they are snug in place. please ensure that your filament is properly dry and your printer calibrated.
it's very important to ensure the bed is thoroughly clean so that there are no adhesion issues, as it has both large flat parts, and small accents, which require proper adhesion
includes bambu studio 3mf files and STLs
all photos uploaded are of the actual printed model, and are copyright protected
if you enjoy this model please consider to buy me a coffee
commercial licence membership available on my patreon

Boost Me (for free)

if you enjoy the design, please consider giving it a boost :)

Comment & Rating (28)

@user_2593360568

Boosted

Made it bigger and printed it in PETG came out fantastic!

The designer has replied

@h3li0

nice :) thanks!

@Aqua88

How can I enlarge it

Show original

@edgaralmeida

My wife brought some Basil home and all pots we had were too small or too big. Printed this one for the fun of it. Scaled to 110% since I needed it a bit bigger. Obrigado. My Kobra 2 doesn't have the Bambu print quality but it worked. (and this fresh spool of white is a bit off, I'm having some troubles to get it right compared with other filaments I've used.)

The designer has replied

@h3li0

thanks for sharing your print, indeed the inserts seem to have lost a bit of definition, did you use the "plate side" for the outside when assembling? (that's how i do it, and use the textured plate to give it a bit of texture). abraço

@edgaralmeida

Replying to @h3li0 :

Hmmm didn't remembered that detail, focused on placing it in a way that wouldn't need supports. Probably wouldn't need them anyway the other way around. Still fresh in the 3D print world, so it's always a good lesson. 😁

@h3li0

Replying to @edgaralmeida :

yep you don’t need them the other way around the chamfer is at a 45 degree angle so it prints fine :)

@gab_devo

Boosted

Print Profile

a1m

Superb The parts intended for the white tiles detached during printing, but the result is still magnificent

The profile uploader has replied

Show original

@h3li0

merci!

@DecoNRefleX

Boosted

Print Profile

x1c

my portuguese father will love these in portogalician azul for his birthday 👍

The profile uploader has replied

@h3li0

great to hear! thanks

@brits

Boosted

Print Profile

x1c

perfect. scaled it to fit my plant that I chopped in the end to make another one. one star down because I scaled it throughout and the little slots are very loose so need to glue them in.

@tcds

Boosted

Very nice design. I printed it scaled to 120% and it turned out perfect. Thank you!

@Apai_2967122446

Print Profile

a1m

Very nice design..

@user_3817627587

Boosted

Print Profile

x1c

@user_2462546030

This turned out to be very nice. Printed as designed. The only issue I had was that the tiles fit very tightly and barely bow out a little. Not really noticeable once everything is complete

The designer has replied

@h3li0

thanks, yeah the tolerances aren’t high to get a tight fit, ensuring the filament is dry and calibrated should mitigate any issues

@user_296632367

Print Profile

a1m

So Nice!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.