AMS Riser V2 Light Switch Mod - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

SAS_ADI

3D Printer>3D Printer Parts

IP Report

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 10% infill

Designer

3.1 h

3 plates

4.8(18)

Open in Bambu Studio

Boost

105

295

208

104

Released

Description

Boost Me (for free)

I created a light switch mod for part 6 of the AMS Riser V2 from maCyo42 for the P1S and P1P

I used the following parts for this:

4x thread inserts M3x4x5
2x M3 countersunk screws 4mm
2x M3 countersunk screw 10mm
1x mini pressure switch
https://www.amazon.de/dp/B08ZKK6P6M?ref=ppx_yo2ov_dt_b_product_details&th=1

1x LED strip
https://www.amazon.de/dp/B0C3LB77RR?psc=1&ref=ppx_yo2ov_dt_b_product_details

ams riser v2

Comment & Rating (43)

@Quantum.Grower

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

Awesome addition to the Riser v2 and P1S! I love this mod. The designer was quick to respond to my message and he helped tweak the model to fit my LED's. Thank you so mich!

@MA2ZAK

How did you change the text on the cover?

(Edited)

@Quantum.Grower

Boosted

Replying to @MA2ZAK :

I did it in TinkerCad

@Pedro48

Print Profile

0.16mm layer, 2 walls, 10% infill

Excellent design, quick wiring photo for those unfamiliar. Positive to the switch, negative direct to the strip, hope that helps.

@stylerworks

Print Profile

0.16mm layer, 2 walls, 10% infill

Please fix the supports! On the large piece, the slicer starts most of the trees in mid-air?? P1P w/BBL slicer. Big mess, with nozzle crashes and stringing everywhere. I paused the print a few times to prune some trees so it was level enough for the interface. The print came out mostly fine with some small defects. Very hard to remove supports even w/scraper and very rough surface underneath. The original uses normal supports which printed and removed very neatly and left a much nicer surface.

@Mr.Spaghetti

Print Profile

0.16mm layer, 2 walls, 10% infill

Great design and prints straightforward. My only issue is the highlight colour (in my case yellow on black) tends to have some bleed through. I redesigned the light globe logo so it is larger and has more colour layers which improved the situation.

@PaperCreations

Boosted

Do you have the STL for the cover on the left side with the different colored SD card and "Bambu Lab"?

@PaperCreations

Boosted

Thanks for sharing! Super excited to get this build completed. Any chance you could share how/where you routed the USB cable for power?

@Mohow

Second this, please give the left cover!

@KHM7

Boosted

Did anyone get the left side cover? and is it possible to get it if so?😇🙏🏼

@plowrie4

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

I'm very thankful for this mod because the useless hole underneath of it drove me crazy and being able to just push a button to turn off my lights is awesome.

@Merk

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

Unfortunately, the left cover is missing

The profile uploader has replied

Show original

@SAS_ADI

this is in the original file. Here: https://makerworld.com/en/models/133452?designId=133452#profileId-155321

Show original

@Merk

Boosted

I only see blank on the original, except for the SD card cover. Everything is printed there, but nothing on the larger panels with Bambu Lab and P1S.

Show original

@Merk

Boosted

Replying to @SAS_ADI :

On my original, only blank is displayed. Except for the SD card cover. Everything is printed on it, only on the large bezels with Bambu Lab and P1S nothing is printed.

Show original

@HungryWolf

Boosted

Does that work with the LED strip? It's always written that the USB port may only be loaded with 1.5 A, but the strip has 2 A according to Amazon... what are your experiences with it

The designer has replied

Show original

@SAS_ADI

It works very well for me

Show original

@HungryWolf

Boosted

Replying to @SAS_ADI :

Okay, did you have to extend the cable or is the length sufficient I mean, you have to solder anyway, but otherwise I'll have to order more cables:) Thanks in advance for the quick response

Show original

@SAS_ADI

Replying to @HungryWolf :

I even had to shorten it

Show original

@avex3d

Boosted

thanks for the switch design. I've bought the pressure switches but I'm trying to use this in another more low profile riser . I'll need to redesign the switch assembly print to suit the riser switch compartment in the other riser. I tried using your step and 3mf files but there it will only import as a mesh file and won't convert to solid no matter what I do, making it impossible to modify. Is there anyway you can provide a editable version of that part? Thanks! Btw, this is the riser i'm trying to use your switch design on. https://makerworld.com/en/models/152071?from=search#profileId-166724 I'll have your pressure button top facing, where the lightbulb symbol goes.

(Edited)

The designer has replied