Bastelwastl_66

cover

IMG_0237.jpg

CleanShot 2026-02-18 at 20.48.16@2x.jpg

plate_1.png

plate_2.png

plate_3.png

2024-07-28_8a53b3cc44724.jpg

0.2mm layer, 2 walls, 5% infill

Screenshot 2026-05-19 140031.png

AMS Variant 24.8cm high 0.2mm layer, 2 walls, 5% infill

Screenshot 2026-05-19 141350.png

AMS Version 17.9cm high 0.2mm layer, 2 walls, 5% infill

Screenshot 2026-05-19 135827.png

AMS Variant 31.8cm high 0.2mm layer, 2 walls, 15% infill

ArtCebola

VideoMontandoaTaca-ezgif.com-resize.gif

WhatsApp Image 2026-05-12 at 9.54.56 AM.jpeg

WhatsApp Image 2026-05-12 at 9.54.56 AM (2).jpeg

WhatsApp Image 2026-05-12 at 9.56.12 AM.jpeg

<figure class="media"><oembed url="https://www.youtube.com/shorts/DGPs6d5xzyE"></oembed></figure> Improved print profile for the 2026 World Cup Trophy model.This profile was adjusted to make the trophy easier to print, cleaner to assemble, and stronger once mounted.The original version required glue because the base parts had flat contact surfaces. In this improved version, I edited the meshes and created plug-style connectors between the parts.The pieces now fit together, rotate into place, and lock firmly without glue.<h3>What was improved</h3><ul><li>Added male/female plug connectors between the parts</li><li>Created a twist-lock style assembly system</li><li>No glue required</li><li>Flattened and aligned the top and bottom surfaces of the parts</li><li>Improved the contact areas for better printing and assembly</li><li>Removed a strange small peak/mesh artifact from the top of the trophy</li><li>Adjusted the meshes for cleaner slicing and a better final fit</li></ul><h3>File organization</h3>This is a single print profile file organized into 3 plates.The parts are separated by color to make the print easier to manage.The profile includes:<ul><li>All base parts</li><li>A small connector test piece from the main trophy body</li><li>The complete main trophy body</li></ul>The small test piece is included so you can test the connector fit before printing the full trophy body.<h3>Print settings used</h3><ul><li>0.4 mm nozzle</li><li>0.2mm layer height</li><li>15% infill</li><li>2 walls</li><li>6 walls on top surfaces</li><li>No supports required</li><li>2 skirt loops for most parts</li><li>Brim recommended only for the large trophy body</li><li>Adaptive layer height used on the large trophy body / base 5</li></ul><h3>Important printing note</h3>For the plug connectors to print and work properly, make sure bridging is enabled.Do not use supports inside the connector areas.The connectors are designed to bridge cleanly and fit together without glue.<h3>Assembly</h3>Print the parts, test the connector fit using the included small test piece, then print the full trophy body.Fit the pieces together, rotate to lock, and the trophy is ready to display. <h3>My Filament Choice (Colors)</h3><ul><li>Green (Bambulab): <a target="_blank" rel="noopener noreferrer ugc" href="https://au.store.bambulab.com/products/pla-basic-filament?skr=yes&amp;id=43392761561251&amp;modelId=2347437">https://au.store.bambulab.com/products/pla-basic-filament?skr=yes&amp;id=43392761561251&amp;modelId=2347437</a></li><li>Green (Amazon): <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/3Qi9jyv">https://amzn.to/3Qi9jyv</a></li><li>Green (US): <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/4e1GE8O">https://amzn.to/4e1GE8O</a></li><li>Gold (Bambulab): <a target="_blank" rel="noopener noreferrer ugc" href="https://au.store.bambulab.com/products/pla-silk-upgrade?skr=yes&amp;id=542501901848416274&amp;modelId=2347437">https://au.store.bambulab.com/products/pla-silk-upgrade?skr=yes&amp;id=542501901848416274&amp;modelId=2347437</a></li><li>Gold (Amazon): <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/4eiDK0y">https://amzn.to/4eiDK0y</a></li><li>Gold (US): <a target="_blank" rel="noopener noreferrer ugc" href="https://amzn.to/4x65v40">https://amzn.to/4x65v40</a></li></ul>🏆🏆🏆Follow me for more!!!🏆🏆🏆🏆🏆🏆Have a good printing!!🏆🏆🏆

No Glue Twist-Lock Fit + Test Piece

Angry_kiddo

微信截图_20260515132211.png

Parameter optimization to speed up printing

Copa del Mundo seccionada

&nbsp;Ich habe den Pokal nachgearbeitet weil bei den anderen Versionen die Buchstaben I und F in Fifa in der Luft hängen. Das Model ist ca. 28cm hoch und wird in Einzelteilen gedruckt. Mit Overture Silk PLA Seide Gold und Bambu Lab PLA Basic 10501

&nbsp;I reworked the trophy because in other versions the letters I and F in Fifa were floating in the air The model is about 28cm tall and is printed in separate parts Using Overture Silk PLA Gold and Bambu Lab PLA Basic 10501

No AMS Fifa World Cup Trophy

Dr.Gamotto

1783682320104.png

20260710_130621.jpeg

20260710_130700.jpeg

Fifapokal The Big One

Natblade

20260620_205212.jpg

20260620_205225.jpg

20260620_205247.jpg

20260620_205302.jpg

20260620_205241.jpg

World Cup Mini version

ASIA

Print Profile(6)

Description

Comment & Rating (511)

This remix is based on

License

Remixes (4)

Related Models