M-Jet Supersprint Painting helper

Since i used tape for the first try to paint my M-Jet Supersprint which ended in the tape failing in the sun and my Supersprint dropping on the floor, breaking the nose and other parts, i decided to design this little helper.

Just screw it on with 2x M3x10mm screws you are gonna need anyways and you're all set. I integrated a hole in the handle for a bungee with hook i had laying around. Can be painted all over and then hung on a line to dry.

Print with at least 3 perimeters to guarantee a solid handle. I used 4 perimeters, but it's a bit much.

Happy painting!