Configurable QR Wifi fridge magnet
Print Profile(1)
Bill of Materials
Description
Configurable fridge magnet with WIFI credentials. Works also without AMS.
You can also configure the count, shape(rectangular/round), and size of used magnets.
As default, the magnet is supposed to be glued, but there is also an option to embed magnets in the middle of the print.
How print
1. Generate model with your configuration.
2. Open model in Bambu studio → add filament → In slice preview, on right side configure layer where QR begins* → Set to change filament.
This will work for BL printers with or without AMS. Without AMS, you just need to change filament manually.
3. If you plan to glue magnets, you can skip this step. If you decide to embed magnets, you also need to configure pause on a layer, where the bridging of magnet slots begins.
4. Print
Membership
Subscribe to get commercial license.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (87)