Search models, users, collections, and posts
Quicky (Angle grinder wrench)
IP Report
GIF
Print Profile(4)
0.2mm layer, 6 walls, 25% infill
Designer
1.5 h
1 plate
No Logo 0.2mm layer, 5 walls, 25% infill
1.3 h
1 plate
ASA - 0.2mm layer, 6 walls, 25% infill
1.4 h
1 plate
Makita and Wall mount
5 h
2 plates
Open in Bambu Studio
Boost
891
1805
163
35
1.6 k
953
Released
Description
Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it
Found this Idea in the video of pocket83 and had to do a 3D printed version of it
The model prints without supports if you use 0.2mm layerheight.
For furhter hardware you need at least 2 M5x20mm hex nut screws.
You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (4)
Click to see more
Comment & Rating (163)