Multiboard Filament Container Spool Mount

Multiboard Filament Container Spool Mount

The Multiboard tend to bend so I recommend to place the original Multiboard Mounting Offset Snap on various positions to increase the stiffness of the board. (the yellow snaps on the pictures)
In addition, you can use the underlayers behind the Container Mount.

Use the helper Tool for easy install:
https://makerworld.com/en/models/559109#profileId-478285

Mount:
modifications:
stiffer and stronger
I set the Lip to the back for tighter fit, cutout for easy access to the T-Bolt
The mount is now 1,2 mm thicker so the T-Bolt's will not touch the Wall

the back of the mount angled with 1,5° to compensate heavier spools

Print:

Adaptive Layerhight and smooth for faster and better print, I recommend 30% infill with Gyroid

Underlayer:
Their are two versions, for the 8mm and the 15mm Multiboard (the blackys)
Print:
default

Their are various versions of this Cerial Container, both versions fit.

Link:

Amazon.com: https://www.amazon.com/dp/B08HQ7133Y?ref=ppx_yo2ov_dt_b_product_details&th=1

Amazon.de https://www.amazon.de/dp/B0BL379HYX?ref=ppx_yo2ov_dt_b_product_details&th=1

Original Mount:
jonathan.penner

First Remix:
fastkast