Search models, users, collections, and posts
The Sardaukar Attack - HueForge
IP Report
Print Profile(2)
AMS Profile 0.08mm layer, 1 walls, 100% infill
Designer
9.1 h
3 plates
A1 Mini, 0.08mm layer, 2 walls, 15% infill
Designer
6.2 h
3 plates
Open in Bambu Studio
Boost
1
1
0
0
9
1
Released
Description
The Sardaukar Attack from Dune Part One
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is split into 3 parts with a size of 200 x 251 mm, totaling of 600 x 251 mm
Filaments Used:
PLA+ eSun Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 0.6
PLA PolyTerra Pastel Banana Transmission Distance: 3.3
PLA+ eSun White Transmission Distance: 1.8
Swap Instructions:
Start with Black
At layer #9 (0.80mm) swap to Gray
At layer #11 (0.96mm) swap to Pastel Banana
At layer #18 (1.52mm) swap to White for the rest.
Since the model is so big, I've simply removed the nozzle purge line at the beginning of the print before the first layer is finished.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)