Greyscale Hueforge Brawl Stars Character Colt

I haven't seen any Hueforge about a Brawl Stars character, so I decided to create one myself after feeling all the possible pressure from my son. :-)

I hope you enjoy it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x315.37mm in size. In order to fit the A1 plate, the model is already scaled at 80% both the X and Y axis. You can adjust the X and Y axis, but do not change the Z axis.

You may print at higher layer heights below the Min Depth of 0.24mm

The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Tough Gray Transmission Distance: 1.8

PLA BambuLab Basic Silver Transmission Distance: 0.5

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Gray

At layer #13 (1.12mm) swap to Silver

At layer #17 (1.44mm) swap to Jade White for the rest.