Crowdstrike BSOD Blue Screen Magnet

Here is a magnet (optional) of the Crowdstrike blue screen of death (BSOD). This version printed is 75x60x5.3 and is printed at 0.10mm layer height with a P1P using a 0.2 nozzle. The magnet holes are for a 20mm magnet. The stl/3mf can be further modified if printing larger sized (X/Y) so long as the Z isn't modified.

Your device ran into a problem and needs to restart.
We're just collecting some error info, and then we'll
restart for you.

100% complete

For more information about this issue and possible fixes visit
https://www.windows.com/stopcode

If you call a support person, give them this info:
Stop code: PAGE_FAULT_IN_NONPAGED_AREA
What failed: csagent.sys

Here are the Hueforge notes.

==============================================================

Project: Crowdstrike BSOD.hfp
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.1mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 3.9mm
The Max Depth is 5.3mm and the Actual Depth is 5.3mm

Filaments Used:
PLA+ Ankermake Red Transmission Distance: 5.6
PLA PolyLite Pro Cold White Transmission Distance: 1.2
PLA+ IIID Max Blue Transmission Distance: 2.8
This print uses 3 unique filaments

Swap Instructions:
Start with Red
At layer #42 (4.2mm) swap to Cold White
At layer #52 (5.2mm) swap to Blue for the rest.