Ulysses S Grant HueForge
Print Profile(1)
Description
Ulysses S Grant HueForge - turned out fantastic. Your mileage/results may vary if you use filaments other than the specific filaments (and TDs) I have listed below. If you have filaments that are close in color, you may come close to similar results.
Created this HueForge as part of a series of “heroes” I admire from history. Here are some others I've created in this series:
- Ulysses S. Grant (this model)
- Dietrich Bonhoeffer
- Gordon B. Hinckley
- Earnest Shackleton
The model is 200x231.4mm in size
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
***I have a profile with “pauses” already programmed in at the appropriate layers.
Filaments Used:
PLA+ Creality Black (#071F0D) Transmission Distance: 0.1
PLA METAL BambuLab Cobalt Blue Transmission Distance: 0.1
PLA Hatchbox Cool Grey Transmission Distance: 0.1
PLA+ Creality White Transmission Distance: 6.5
Swap Instructions:
Start with Black (#071F0D)
At layer #7 (0.64mm) swap to Cobalt Blue
At layer #12 (1.04mm) swap to Cool Grey
At layer #16 (1.36mm) swap to White for the rest
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)