Eufy RoboVac Filter Adapter

Eufy RoboVac Filter Adapter for ‘unibody’ filters that fit the following models:

‘11S Max,15C Max,30C Max, 25C Max, G10, G30,G30 Edge, G30 Hybrid,G30 Verge, G15, G20, G20 Hybrid, G32 Pro’

This adapter allows the use of the cheaper filters meant for the following models:

‘11S, 15T, 30, 30C, 15C, 12, 25C, 35C, 11S+’ with a filter dimension of 110*47*9

I used the following filters:

https://a.co/d/4CxJMO6

Using a frame/pocket design with the extra pegs/edge support on the bottom prevents the filter from warping under vacuum.

I have a G30 Edge, and this adapter fits like a glove. It should also fit other models using the same ‘unibody’ filter listed above, but I don't have a way to verify the waste bin dimensions to confirm. YMMV

Designed in FreeCAD and exported to 3mf.

Printed in PLA+ at .2 layer height with a .4 nozzle on P1S.

Requires print supports (take your time removing them after printing)

Model filament - 14g

Support filament - 6g

I also printed slower at 100 mm/s.

G30 Edge - Confirmed fit