Star dust Pot and House Plant Planter - Vase mode - Free 3D Print Model

Search models, users, collections, and posts

SASSy Design

Household>Decor

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

Designer

2.7 h

1 plate

4.7(15)

A1 Mini (Vase mode, 0.2mm layer, 1 walls, 0% infill)

1.5 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

119

269

236

139

Released

Description

A detailed plant pot inspired by the shimmering structure of stardust.

Print information:

Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)
Recommended using a lower layer hight (0.15/0.2mm) for better results in details
Prints very good in any filament
The model is scalable to your liking

Happy printing!

Comment & Rating (25)

@mmtanqueiro

Print Profile

A1 Mini (Vase mode, 0.2mm layer, 1 walls, 0% infill)

Prints great!

The profile uploader has replied

@paatryk93

Thanks!

@ShelbieFran

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

gorgeous design!

@user_2270069679

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

It is a nice flower pot, which unfortunately was leaky towards the bottom. However, the sides were sealed. I printed the pot again with a 4mm base and 4mm walls

(Edited)

Strength Issue:however, the problem then also arose that the pot was not sealed. The problem apparently lies with the transition from the base to the walls of the design. Furthermore, water also leaked through the walls at the segment transitions. Nevertheless, a very nice design. I will now print a saucer for it and be done with it. It might be better to have a complete hollow body that is sealed and attach the design there.

Show original

@green_fish

Boosted

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

awesome 👍

@user_363560303

Boosted

Print Profile

A1 Mini (Vase mode, 0.2mm layer, 1 walls, 0% infill)

nice and clean design 😁

@di_prints

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

I like the texture of this design! Looks very elegant and beautiful! I printed it with Nobufil ABSx Neon Pink in P1S. The printing process was good👌 I will print it again in some pastel color...

@user_3928763432

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

wunderschön

@PhlapJackson

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

@LayerLegacy

Boosted

Looks perfectly and does not need a lot of filament to print original size!

The designer has replied

@SASSyDesign

Thank you!

@Fab6631

Print Profile

SASSy Vase mode - 0.16mm layer, 2 walls, 0% infill

parfait

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.