Turbo whistle siren
Print Profile(5)
Description
Script for creating Turbo Whistles
Advanced Print! Not for beginner! - This is using 0.35 tolerance, make sure not to alter the print profile else it will not work for you! If your print is not clean you need post processing and a bit lubrication.
|
If it doesn't turn easy, you can either increase the print in place gap (pip variable) or scale it up a little.
Also you can use some silicone spray, submerging in water also decreases friction (while wet).
The model has a 0.35 gap with a bottom and top chamfer. You can change the gap (pip) using the customizer!
Keep in mind that not every size or slot number will sound good or even work.
Ensure you keep seams on the inside or outside - not within the gap
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (743)