Fanatec ClubSport DD/DD+ Mount
Print Profile(2)
Description
Summary
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts
The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the center points of the slots. However, I tested it on Sim Labs Series 40 Extrusion and it worked just fine.
https://www.tnutz.com/product/ex-1530-black-2/
https://www.tnutz.com/product/ex-1545-black/
This mount allows 1mm of clearance from top to bottom for the power brick. The clearance works perfectly fine, but I added a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo.
*There is no need to use supports, simply print with the Fanatec Logo on its side.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
30
Filament: Inland PLA+
Black
Post-Printing
Optional: Add a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo and possibly the sides.
License
Comment & Rating (60)