Oventrop M32x1.0 to M30x1.0

Summary

This is an remix of the Oventrop adapter by DerEnderKeks but with an M32x1.0 thread.

Print Settings

Printer:

Bambulab X1C

Rafts:

Yes

Supports:

No

Infill:

15

Filament:

Bambulab ABS or PETG-CF

Notes:

Use tree support to make removing the support easier, or print upside down.

Usage/Installation

Insert the pin

Insert the pin from the inside of the adapter and push it through the hole.

Install to radiator valve

Mount it using a pipe wrench (makes it easier to screw it on when you are mounting it for the first time) to the valve. Make sure that the pin is still inserted.

Install a regulator

Now you can screw on (probably) any thermostat/regulator that requires a M30*1.5 threading.