Simple Compartments for shelfs, doors, a wall, ..

Well here I have a simple design for you.

I was looking for a place to put small itmes in my kitchen cabinet. My first print from ASA warped kinda badly so I redesigned it with some reinforcements.

You will need different Screws (diameter) for the different versions:

• XS = 3 mm
• S = 3 mm
• M = 3,5 mm
• L = 4 mm
• XL = 4,5 mm
• Print & assembly tipps:

I printed my Version (M) with a 0,6 mm Nozzle and 0,3 mm layer height, 20% Infill, 2-3 Perimeter.

Dont overtighten the screws.

Have fun and keep printin!