iPhone 15 Pro Max Phone Case v_0.7.1

iPhone 15 Pro Max Lightweight Phone Case Hard Shell v_0.7

Lens frame press in diagonal order
Printer: Bambu Lab P1S
Layer height: 0.2 mm
Material: PETG, ABS

This protective case is an accessory for my phone. The corners will break if dropped (I've dropped it several times). This is due to the nature of FDM printing, and there's no solution. Its advantage is being lightweight, but holding a metal-framed phone in winter might feel cold.
I use PETG, but ABS works too. The printer used is the Bambu Lab P1S. Other printers may not ensure the same precision.
There are no MagSafe accessories, so I cannot determine how much the magnetic force is reduced.

Update 0.71:
Lens frame 0.7-0.71
Increased frame width, making it less likely to misalign during installation
Two thickness options (loose 1.35mm, tight 1.4mm) to accommodate different printers that might produce prints that are either too loose or too tight, or for using glue to fix it in place.

---------------------------------------------------------------------------------------------------------

iPhone 15 Pro Max 轻便手机壳 硬壳 v_0.7

镜头框对角顺序按压
打印机:拓竹 p1s
层高0.2
材料petg abs

这个保护壳是我的手机衍生品,摔一次边角就会碎掉(摔了好几个了),fdm特性,无解.胜在轻便,就是冬天拿金属边框手机可能有点冷.
我用的petg,用abs也行把,机器用的拓竹p1s,其他机器打印无法保证精度.
magsafe配件没有,所以无法知道磁力消减多少.

0.71 更新:
镜头框0.7-0.71
加大边框宽度,安装更不容易错位
两个厚度,(松1.35mm,紧1.4mm)适应不同打印机打出来安装过松或者过紧的问题或者使用用胶水固定