Ring with THE Rock (no supports needed)

This is the most fantastic Ring with a Rock ever. It doesn't only exhibit a rock but the full glamorous and only one, the Rock (Dwayne Johnson). This once-in-a-lifetime multi-carat ring will show both your obsession for the fine art of 3D printing and your unique sense of elegance.

But wait, there's more! Imagine the look on your significant other's face when you casually flaunt this masterpiece at the next family dinner. Watch as they marvel at your ingenuity and perhaps question your sanity.

3D Printing:

• No supports are needed, the inner top portion of the ring is bridges (which sag just a bit if you print if you use PETG).  You do need to use a brim.
• Resizing: The inner width of the ring is 20mm, but resize to 110% of the width of your finger.
• You can break the model into 3 objects, the ring, the “shoulder”, and the head (the rock). You can color any filament by object, so the sky is the limit with combinations.
• I printed it using adaptive layer height, in a X1C
• I was too lazy to put my 0.2mm nozzle and used my 0.4mm nozzle.
• My print was using silver Giantarm silver PETG.
• I then spray painted with chrome paint, but I recommend sanding a bit with a fine sand. Note that the original “silver PETG” is just a glorified gray.

Credits:

• The actual head is public domain and made available by Nopety at Printables. This is an original model using this beautiful design by Nopety, thank you very much.