It almost is like staring at a Chameleon. You know it’s there but it blends in so well. Planing to do similar print bed but more out there TPU colour.

Lemon_ Myrtle_Designs

J'ai imprimé sur ce plateau pour essayer le filament "TPU for ams" et la plaque d'impression Juupine.
Je pense que l'on peut obtenir un meilleur résultat.

I printed on this plate to test the "TPU for ams" filament and the Juupine printing plate I believe a superior result is achievable

McSeam

nectar

Imprimé avec le filament TPU for AMS sur A1 avec plaque d'impression Juupine.

Printed with TPU for AMS filament on A1 with Juupine print plate

3DMF

0.2mm layer, 2 walls, 15% infill

Washitoc

user_248189346

A1 mini 0.16mm 4 walls, 100% infill

PECY.FPV

edding3001

nice but it's not precise in measurements

Dhulin

I designed to be printed in PLA and i made a lot of test in my P1S. What type of filament do you use? maybe I need to add more tolerance for certain cases

diymexicomx

Ottima cover, si adatta al telefono ed è ben studiata. Ottima! 

Excellent cover, it fits the phone and is well designed. Excellent!

Turdeinn

printed fine and looked good, holes line up well. But the Scaling is a bit off, so the phone moves a little bit around inside the case.

Magrin

Awesome print. printed using PLA Basic filament

appleamplifier

top agora fazer na com vermelho está cor foi de filamento de teste top obrigado

Top now to do in red this was the test filament color top thanks

MKBS-3D

cover

IMG_20231029_153433909_HDR.jpg

IMG_20231029_153506774_HDR.jpg

plate_1.png

IMG_20231029_153535734_HDR.webp

IMG_20231029_153433909_HDR.webp

IMG_20231029_153506774_HDR.webp

I printed it with PLA and a layer height 0.20 in a Bambu lab P1SI printed it with Bambulab PEI textured plate and with a PEO ologram-ish-thingy plate. hope it helps : )

0-02-05-4392f021beb30048e9824c095fc88f73e5b59a8cc17eae8adec52cac972b8c5a_1341f7faeb707f88.jpg

0-02-05-4fa09aa6f6e451b6a2c3edf210352b6446be7cab4e0e6c8c8fcd2865e7eaa1a4_a8edcda6f26dd8f9.jpg

0-02-05-aca65b6460131256761dbea862d62cf736ed54e4a1a884fb29f87e6819b801cd_fe9028bc8fbdf536.jpg

0-02-05-e82682637445d2ddfb1650a7c5fdca7eb418b4931eafd0b48258effdcc9c66f2_334673f8e4ca3054.jpg

Description: This print profile is optimized for the Bambu Lab A1 mini and is intended for printing a phone case for the Samsung Galaxy A14. It uses 100% infill for maximum strength and rigidity, with 4 wall lines for excellent durability and impact resistance. Standard supports are enabled to properly support any overhangs and ensure reliable print results. This is my personal print profile that I use for all my TPU prints, and I have never experienced any issues with it.Recommendation: Adjust layer height if needed based on your desired surface finish. This profile was tested with a 0.2 mm layer height.Note: I am not the creator of the model; this profile is intended to optimize print quality and reliability for this specific application.

Akira4577

2024-07-31_4f911aa2277b7

made it for the a1 scale up by 1% for less tight fit&nbsp;

A1 mini, 0.2mm layer, 3 walls, 15% infill

I designed it for PLA, but some printers leave the model very tight and it&#39;s difficult to remove it from the phone, so I recommend  TPU.&nbsp;I printed it with PLA and a layer height 0.20.no need for supports.it was printed with Bambulab PEI textured plate and with a PEO hologram-ish-thingy plate.hope it helps : )

Print Profile(3)

Description

Comment & Rating (123)

License

Remixes (2)

Related Models

Samsung galaxy A14 case