Search models, users, collections, and posts
Govee 6 Button Remote for Honeycomb Storage Wall
Remixed by
IP Report
Print Profile(3)
0.2mm layer, 3 walls, 15% infill
Designer
36 min
1 plate
0.8mm nozzle, 0.4mm layer, 3 walls, 15% infill
Designer
22 min
1 plate
Modified For Wall Mount - 0.2mm layer, 3 walls, 10% infill
17 min
1 plate
Open in Bambu Studio
Boost
16
43
4
2
53
39
Released
Description
Govee 6 Button Remote Mount for Honeycomb Storage Wall
Requires some supports but prints fast and they are very easy to remove. Can be oriented upside and rightside up on your HSW because it is held in place. Im adding the 0.4mm nozzle and 0.8mm nozzle. This model was designed to print with 2 walls at 0.8mm nozzle, but I set to 3 for 0.4mm nozzle to help reduce the time required.
The fit for the remote is tight enough to hold it at either orientation, but easy to remove the remote if you need to. It also has a cut out so that you can have the lanyard attached.
Let me know if you have any issues.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (4)