3M Command Strip - Honeycomb Storage Wall Mount

A wall mount for HSW that doesn't require screws. 
REQUIRES:

• Standard HSW inserts (I'd recommend the easy remove inserts by Yanshay)
• The Large size (~74mm adhesive surface) command strip. (smaller sizes can be used too, you'll just have a weaker adhesion)

Simply connect the push fit caps connect either side of the inserts.
Printed in 0.24mm Draft mode, 15% gyroid infill.

Disclaimer:

This model is provided as-is for personal use. I accept no responsibility for any damage, injury, or loss resulting from its use. Load capacity is entirely dependent on the adhesive method you choose, if you're using Command Strips or similar adhesive products, you are responsible for ensuring they are appropriate for your wall surface, the weight of your items, and the conditions of your environment. Always follow the adhesive manufacturer's guidelines. Use at your own risk.