D12 Kitcard V1

Greetings fellow adventurers,

Whether you need an emergency d12 or a quick little extra to put in a celebratory card for a fellow DnD’er, the “D12 kitcard” has you covered.

Edit: 
This version (V1) features a spindown layout of which the opposite sides do not sum to 13:
1 surrounded by 5-6-2-3-4
7 surrounded by 11-12-8-9-10
 

V2 with a standard layout of which the opposite side sum to 13 can be found here:

https://makerworld.com/en/models/559955#profileId-479191

V3 with expanded multicolor options (and the standard layout) can be found here:

https://makerworld.com/en/models/560246#profileId-479506

Assembly Instructions (no glue required):

1. Carefully remove each piece from the frame.

2. Gently bend the long face-pieces into shape.

3. Slide the 2-face of the die into the grooves of 1 & 6-face of the die.

4. Then go around connecting the other faces of the top and bottom part.

5. Place the 12-face on the top, aligned with the 2-face as shown below.

6. Place the 5-face on the bottom, aligned with the 6-face as shown below.

And there you have your new D12!

Options:
In the print profiles you will find the following options:

• duo color with frame
• single color with frame
• duo color no frame
• single color no frame

Materials:
All these were printed in pla.