Dehya Genshin Impact. Hueforge

Dehya is a playable Pyro character in Genshin Impact.

Looks better in real than pics

Try using gold instead of yellow

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

The Model is 106x212mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Yellow
At layer #15 (1.28mm) swap to Red
At layer #19 (1.6mm) swap to White for the rest.