Saw's Billy the Puppet
Print Profile(1)
Description
Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right place, I only post photos of the actual print!
This was a request form one of my Patreon members and part of my horror movie series. If you want to make a request or want FREE *Patreon exclusive* models(like the ones below), members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D
Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture Space Gray Transmission Distance: 1.4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Overture Red Transmission Distance: 8.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Space Gray
At layer #15 (1.28mm) swap to Jade White
At layer #20 (1.68mm) swap to Black
At layer #23 (1.92mm) swap to Red
At layer #29 (2.4mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)