Wooden train mountain tunnel with integrated track
Remixed by
Copyright Claim
Wooden train mountain tunnel with integrated track
Remixed by
Boost
53
137
38
Print Profile(1)
0.16mm layer, 2 walls, 10% infill
Designer
8.2 h
1 plate
Open in Bambu Studio
Boost
53
137
38
13
142
110
Released
Description
This is a tunnel remixed from BasD's "Model Train Tunnel".
The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has flattened bottom.
An overpass and some details were added.
Comment & Rating (38)
All
Print Profile
0.16mm layer, 2 walls, 10% infill
I love it and my son love it too! A long print on multicolor (3 colors) but it worth it the tracks fit perfectly!
I used the multicolor PLA Match from Ziro, Orange and grey PLA+ from sunlu.
Thank you for this amazing design!
(Edited)
The designer has replied
3
Reply
Looks amazing. How many filament swaps?
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 10% infill
Great! set this to print overnight and it was ready for play the next day. I used bambu’s marble filament, which came out great. fits Brio/Thimas/Ikea tracks well.
The designer has replied
1
Reply
O looks great! In my experience you can get the support from the track, if you do it very carefully with a knife. (watch out for your hands ;-))
(Edited)1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 10% infill
Perfect.
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Boosted
Hand painted
(Edited)
1
Reply
Boosted
Replying to @ozskeeter
... and these are perfect height to create a hill up and down from the overpass section https://makerworld.com/en/models/79423#profileId-83931
0
Reply
Replying to @ozskeeter
Very very very nice
(Edited)1
Reply
fantastic design.
but why is there a strange hole at the bottom?
0
Reply
Boosted
I had that "split" at the bottom as well ... its something the designer might be able to tweak so the slicer doesn't create that but it does not seem to cause any problems with the function or strength
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
This came out really, really nice!
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
Removing support from the top of the tunnel was a bit of a pain but otherwise good
0
Reply
10/10 excellent design wow ! Thanks
(Edited)
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 10% infill
The designer has replied
0
Reply
Very nice finish!
0
Reply
Print Profile
0.16mm layer, 2 walls, 10% infill
1
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld