hi thanks! You are printing the other model Tora shoes: https://makerworld.com/en/models/527598-tora-barefoot-shoes

Mitsubishi lancer

salve Alessio volevo stampare il suo modello di scarpa scaricato file macchina partita ma non viene fuori come sono state elaborate da lei non capisco dove sbaglio se fosse così gentile 

Hello Alessio I wanted to print your shoe model I downloaded the file the machine started but it's not coming out as you processed it I don't understand where I'm going wrong if you would be so kind

antodsa72

The Napoleon Bonaparte

sorprendente, lo único que el interior no es muy acogedor, pero aún así vale la pena

Stunning, the only drawback is the somewhat uninviting interior, yet it remains worthwhile

fRAStone

EU 37 - 40 sizes

Thanks! Which printer, nozzle, filament brand and hardness did you use? 

what in the spray-on shoes is going on here this is cool

user_1025964749

Hi! I am sharing sizes from EU 37 to EU 46

As soon as I can restore my 3d printer I will try. Thank you.

Mister Print 3D!!

hi thanks! It should print fine, especially with TPU 95A, please let me know! Kind regards, Alessio

is it possible to print with a 0.04 nozzle or will it ruin it? amazing design btw! ;)

Printer Pasta

Awesome model!! These are some awesome shoes!

SR Prints

hi thanks! Please see minute 8: https://www.youtube.com/watch?v=6ae-rzo_zJM&amp;t=735s

Also find the Blender file by selecting "download STL/CAD files" 

Kind regards,
Alessio

Wow how do you design these? They look so good 

hi thanks! not planning to make kids sizes at the moment. Kind regards, Alessio

cover

2024-07-13_o1iafenybspm.jpg

EU 37 

plate_1.png

EU 38 

plate_2.png

EU 39 

plate_3.png

EU 40

plate_4.png

Aspys_print.1.jpg

Use 0.6 nozzle and 95A TPU &nbsp;Keep this profile&#39;s filament presets. If the overhang fails, reduce temperature (as low as 200°C depending on the filament) Carefully check that all settings transfer when switching printer or nozzle in Bambu Studio&nbsp;&nbsp;Shoe:<ul><li>layer height: 0.36mm</li><li>line width sparse infill: 0.9mm</li><li>wall loops: 0</li><li>top shell layers: 0</li><li>bottom shell layers: 0</li><li>sparse infill density: 43%</li><li>Infill pattern: Grid</li><li>Infill anchor: 1000 (unlimited)</li><li>Max infill anchor: 1000 (unlimited)</li><li>Infill direction: 45°</li><li>Detect narrow internal solid infill: no</li><li>Speed sparse infill: 18 mm/s</li><li>Enable support: no</li><li>Reduce infill retraction: no</li></ul>Cube modifier  (256x256x2.4mm at Z=0):<ul><li>Infill density: 60%</li><li>Infill line width: 1.2mm</li></ul>&nbsp;Filament:<ul><li>Retraction: 2.4mm</li><li>Wipe: no</li><li>Z hop: 1.2mm, Normal type</li><li>Max volumetric speed: 4.8 mm^3/s   </li></ul>Best (comfort and durability):<ul><li>80A * [Recreus 82A (220 °C), 3D fils 85A]</li></ul>Ok:<ul><li>90A *</li><li>95A (Overture is good, many others break fast) </li></ul> * won&#39;t print on stock Bambulabs, only on A1 with <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/95155#profileId-101634">this</a> upgrade and no PTFE tube. &nbsp; No: <ul><li>“high speed”, “high flow” filaments (too stiff, uncomfortable)</li><li>Esun 83A, Siraya 85A, Ninjatek 75A, Varioshore, Recreus 60A, 70A, Azurefilm 85A, Foamy (bad layer adhesion)</li><li>Basf 85A, Extrudr 85A, (not really 85A)</li></ul>

EU 41

Use 0.6 nozzle and 95A TPU &nbsp;Keep this profile&#39;s filament presets. If the overhang fails, reduce temperature (as low as 200°C depending on the filament) Carefully check that all settings transfer when switching printer or nozzle in Bambu Studio  Shoe:<ul><li>layer height: 0.36mm</li><li>line width sparse infill: 0.9mm</li><li>wall loops: 0</li><li>top shell layers: 0</li><li>bottom shell layers: 0</li><li>sparse infill density: 43%</li><li>Infill pattern: Grid</li><li>Infill anchor: 1000 (unlimited)</li><li>Max infill anchor: 1000 (unlimited)</li><li>Infill direction: 45°</li><li>Detect narrow internal solid infill: no</li><li>Speed sparse infill: 18 mm/s</li><li>Enable support: no</li><li>Reduce infill retraction: no</li></ul>Cube modifier  (256x256x2.4mm at Z=0):<ul><li>Infill density: 60%</li><li>Infill line width: 1.2mm</li></ul>&nbsp;Filament:<ul><li>Retraction: 2.4mm</li><li>Wipe: no</li><li>Z hop: 1.2mm, Normal type</li><li>Max volumetric speed: 4.8 mm^3/s </li></ul>&nbsp;Ottimale (comfort e durata):<ul><li>80A * [Recreus 82A (220 °C), 3D fils 85A]</li></ul>Accettabile:<ul><li>90A *</li><li>95A (Overture è buono, molti altri si rompono velocemente) </li></ul> * non stampa sulle Bambu Lab standard, solo su A1 con <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/95155#profileId-101634">questo</a> aggiornamento e senza tubo PTFE. &nbsp; Sconsigliato: <ul><li>filamenti “alta velocità”, “alto flusso” (troppo rigidi, scomodi)</li><li>Esun 83A, Siraya 85A, Ninjatek 75A, Varioshore, Recreus 60A, 70A, Azurefilm 85A, Foamy (scarsa adesione tra gli strati)</li><li>Basf 85A, Extrudr 85A, (non sono realmente 85A)</li></ul>

EU 41 size

<figure class="media"><oembed url="https://www.youtube.com/watch?v=nii49-HuheE"></oembed></figure>&nbsp;<figure class="image image_resized" style="width: 55.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000538760/design/2024-11-28_cc725b45ba806.png"></figure>&nbsp;

Print Profile(2)

Description

Comment & Rating (25)

License

Related Models

Aspys barefoot shoes

Print Profile(2)

Description

Comment & Rating (25)

License

Related Models