7 Inch Pi Touch Screen Display Wall Mount Case - Free 3D Print Model

Search models, users, collections, and posts

JED

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

2.1 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

170

269

100

Released

Description

🛠️ Design Brief: 7-Inch Touchscreen Wall Mount Case

🎯 Objective

Create a minimal, secure wall-mounted enclosure for a 7-inch touchscreen (such as the Uperfect Touchscreen). Designed to hold a thin single-board computer (SBC), this case is ideal for smart interfaces or home dashboards with a sleek, flush appearance.

📐 Design Features

Wall-Mountable Enclosure: Slim profile for flush wall integration.
Clean Cable Management: Space for routing power and data cables through the back or side.
Ventilation Slots: Prevents overheating by allowing airflow.
Four-Point Assembly: Front and back pieces secured by four screws and heat-set inserts.
Modular Interior: Space designed to accommodate a compact SBC like the Radxa Zero.

🧰 Materials & Tools

Filament: PLA or PETG recommended
Tools:
- 3D printer
- Soldering iron (for heat-set inserts)
- Screwdriver
- Wall anchors and drill for mounting
- Flush cutters and basic hand tools

🖨️ Printing & Assembly

Print Settings:
- Layer Height: 0.2 mm
- Infill: 20–30%
- Supports: Enabled
- Wall Line Count: 3
Assembly Steps:
1. Print both enclosure parts
2. Heat-set four M3 inserts into the back piece
3. Place the touchscreen into the bezel, secure as needed
4. Mount the SBC behind the screen using M2.5 screws
5. Route power and data cables
6. Close the case using four M3 x 10mm screws
7. Mount to wall using drywall anchors or wood screws

🧾 Bill of Materials (BOM)

🔧 Core Components

Item	Description	Qty
7" Touchscreen Display	Uperfect Touchscreen (B0BKGCB18T)	1
SBC (Single Board Computer)	Radxa Zero (preferred), or similar thin SBC	1
MicroSD Card	Class 10, 16GB or higher	1
5V 3A Power Supply	USB-C or appropriate for board	1

🖨️ Printed Parts

Item	Description	Qty
Front Bezel	Screen holder	1
Back Housing	Holds board and mounts to wall	1

🪛 Hardware

Item	Description	Qty
M2.5 x 6mm Screws	Attach SBC	4
M3 x 10mm Screws	Assembly screws	4
M3 Brass Inserts	Heat-set into case	4
Wall Anchors & Screws	For wall installation	2–4

🧰 Optional

Item	Description	Qty
Passive Heatsinks	Optional cooling	2–3
5V Fan (30mm)	For active cooling	1
Cable Grommet	Wall cable exit	1

📌 Notes

Originally tested with an Orange Pi 2 due to size, but Radxa Zero is the recommended choice for improved performance and compatibility.
Design can be remixed to accommodate alternate board layouts.
Ideal for smart home dashboards, room controllers, or info panels.

Comment & Rating (9)

@user_3745234553

does it work with hosyond touch screens (the 7 inch ones) model looks nice tho might try it

The designer has replied

@JED_

Im pretty sure mine was hosyond, its decent. The only thing I can recommend is that i found the airflow isn't soo great. If you want to remix it and add some vent it should help a little.

@TDog1991

nice design but needs a bit more instructions and photos of the inside, what are the two small pieces for? Mounting to the wall? if so how do they work as I cant tell

The designer has replied

@JED_

Yeah, i can update with more information when i have some spare time. Essentially the clips are the wall mounting mechanism. they hook into the openings on the back of the case