Voron MKS IPS50 Display Case

This is a Voron 2 Display Case for the Makerbase MKS IPS50 5-inch LCD with hinges for the frame. The unique design allows the frame to be tilted at various angles, which is very important to me. In version 1, the frame cannot be used completely flat, but if you place something 5 mm thick under the legs, it works without tilting.

The model consists of the frame and the hinges for mounting on the aluminum frame. It is best to use four M3 x 8 mm screws for the hinges and four M3 x 6 mm screws for the display. Slightly longer screws would also work.

I also add a front skirt a b 300 part that has been changed in length for the 300 x 300 version so that everything fits again.

------------------------------------------------------------------------------------------------------------------------------------------------------------------

This is a Voron 2 Display Case for the Makerbase MKS IPS50 5-inch LCD with hinges for the frame. The unique design allows the frame to be tilted at various angles, which is very important to me. In version 1, the frame cannot be used completely flat, but if you place something 5 mm thick under the legs, it works without tilting.

The model consists of the frame and the hinges for mounting on the aluminum frame. It is best to use four M3 x 8 mm screws for the hinges and four M3 x 6 mm screws for the display. Slightly longer screws would also work.

I also add a front skirt a b 300 part that has been changed in length for the 300 x 300 version so that everything fits again.