Wide Guitar Pedal Footswitch Topper V2 - Free 3D Print Model

Search models, users, collections, and posts

hejebot

Hobby & DIY>Music

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 15% infill

Designer

1 h

2 plates

4.8(16)

Improved V2

Designer

56 min

2 plates

4.7(12)

Open in Bambu Studio

Boost

118

302

636

434

Released

Description

Slight geometry refinements

These pedal footswitch toppers have raised/wider heads than most others for easier access and more satisfying activation.

There are tall and short versions included, as well as a version for thicker 11mm switches like the ones found on Morningstar, etc.

Please let me know if you run into any issues or need adjustments, thanks!

Boost Me (for free)

If you find any value in my work, feel free to give it a like, boost or a follow – your support means the world!

guitar pedal footswitch

pedal switch topper

pedal footswitch topper

switch topper

guitar pedal switch

guitar pedal switch topper

pedal knob

guitar pedal knob

pedal switch cover

guitar pedal switch cover

Comment & Rating (43)

@user_4192748394

Boosted

Made a second batch. This time in PETG. First try through the app failed (no bed adhesion). Cleaned the bed and went to Bambu Studio. Added a brim, changed the infill type, added ironing, disengaged supports, sliced with PETG. Came out great. Even better fit than before.

The designer has replied

@heje

Awesome! Please share your profile if you haven't already!!

@user_4192748394

Boosted

Replying to @heje :

hi, my level is currently to low to send you a message. and I cannot upload this profile directly, as it is. it allowed by the original file. I stored a copy and will send it as soon as my level allows.

@StereoFreq

Print Profile

0.2mm layer, 6 walls, 15% infill

Love the concept. I went looking for this and this was the only one I could find. Unfortunately I tried printing it in a few orientations with and without supports and none of them had any good fitment because the design doesn't have any give in the coupler. So, I designed my own. These are just 3, but I probably printed about 5.

Other Issues:No give to fitment (too tight).

The profile uploader has replied

@heje

Hi, I'm sorry that you've had issues with the fitment. They are intentionally made to be a bit tight as I wanted them to be very secure during performances without the risk of them coming off as some filaments can have a tendency to be slippery. I'm very curious now because I think you're the first person so far that couldn't get them on at all. Could you tell me which filament you're using so that I can try testing on my end? So far, I've tried Bambu PLA/PLA Matte and PETG sans supports without any real issues. Thanks!

(Edited)

@StereoFreq

Replying to @heje :

Yeah, I was using the BambuLab PLA glow in the dark filament with default settings. I think though that the issue here isn't the filament. I discovered in testing my design that every footwswitch peg has a slightly different tolerance with the diameters. So, your design can't flex because the outside of the inlet is solid. Jump on my page and look at how I did the coupler. Notice it has a slit down the sides and a gap between the inner and outer diameters, so it can flex a bit.

(Edited)

@5thumbs

Boosted

what a fun print! Printed 6 for my Spark X pedal. Now I can stomp instead of trying to press pedal with my toe when I play barefoot! Thanks for sharing! -

The designer has replied

@heje

Glad to hear that they're working out for you! You know, that was also the same reason I wanted these toppers in the first place, cheers!

@user_4192748394

Boosted

Print Profile

0.2mm layer, 6 walls, 15% infill

Had some slight stringing when printing multiple on the same plate, but could be my PLA getting humid. Had some „lose“ filament strings on the inside; printed without any supports. But nothing too bad, that could not be pulled of or be cut with a clipper. Installed on my Kemper stage (stomp box switches) - and they are a great fit. Might print them in a translucent PETG in the future for the looks. Suggest putting on an old switch 2-3 times first to test fit and slightly „wear them in“.

The profile uploader has replied

@heje

Thanks for sharing your experience and offering tips! I haven't tried printing them without supports, but glad to know that they still work!

@Crabfeathers

Print Profile

0.2mm layer, 6 walls, 15% infill

A little tough to install but that’s probably a good sign that it’ll stay put! Great model- will be printing more for sure. Doing these in glow-in-the-dark filament for those dark stages and theater pits as an added bonus.

The profile uploader has replied

@heje

Glow-in-the-dark filament is a great idea, didn't even think about that!

@user_1270113457

Boosted

Thanks! works like a charm on my tap-tempo!

@user_3608193094

Boosted

Print Profile

0.2mm layer, 6 walls, 15% infill

Great print. use Standard plate for regular footswitches.

@5thumbs

Boosted

a simple pedal button can provide joy! here is a boost token! nice design

@user_4015411712

Could you tell me the dimensions and height of this case? I'm looking for a 13.2 mm inner diameter (to fit the footswitch) 26 mm outer diameter (so it doesn't touch the other buttons) height ~10 mm

@user_283688706

Print Profile

0.2mm layer, 6 walls, 15% infill

worked for my zoom ms-60b+

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.