Can-Cap

Inspired by the Bottle Cap/Maker V2 from BamBam Design, I have designed a can cap.

This means that insects no longer have a chance of getting into the can, which you might then drink or swallow.

I have printed the can cap with 3 walls, but 2 walls would certainly also work.

It is important that you actively place the model on the printing plate in the slicer so that you end up with a smooth and even surface.

Update 04.10.2024
If you would like to use your own motif, download the STL: “cun-cap clear” and import it into the slicer.

Under the following link you can then upload your motiv as SVG, customize it and then download it: https://makerworld.com/de/makerlab/makeMySign/edit/1850334?from=makerlab

Make sure that the diameter of the plate is not larger than 52mm and make the following settings:

• Base Plate:  1mm
• Text & Sticker: 0,36
• SVG: 0,36
• Shapes: 0,36
• Special Mode: Activate Facedown Mode

Download the finished file and import it into the existing project in the slicer (geometry only). Align, mark everything and merge.

Have fun with the can cap and have a nice summer.