Lyrkan

cover

IMG20240705152202.jpg

ZT-703S_Rugged_Case_2024-Jul-04_06-00-48PM-000_CustomizedView11009617733.jpg

ZT-703S_Rugged_Case_2024-Jul-04_06-02-47PM-000_CustomizedView20393463957.jpg

BOX - bottom

plate_1.png

BOX - lid

plate_2.png

latch, seal & grid

plate_3.png

INSERT - bottom v1

plate_4.png

INSERT - bottom v2

plate_5.png

INSERT - top

plate_6.png

Zlatislav

Screenshot 2025-07-18 140246.png

<ul><li>Layer Height: 0.20 mm (Standard Quality)</li><li>Walls (Perimeters): 2 walls (increase for added strength if needed)</li><li>Supports: None (Print without supports)</li><li>Filament Colors:<ul><li>Matte Black</li><li>Matte Red</li></ul></li><li>Note: Strength can be improved by increasing the number of walls (e.g. 3 or more)</li></ul>

0.2mm layer, 2 walls, 15% infill

https://www.printables.com/model/258431-rugged-box-parametric

This is a remix with added inserts of the excellent <a target="_blank" href="https://www.printables.com/model/258431-rugged-box-parametric" rel="nofollow noopener ugc">parametric rugged box</a> that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories.&nbsp;The two grids have to be glued in to the inserts and some foam can be added on the lid insert where the screen lands.

Rugged case for ZT-703S / ZT-702S Multimeter

ASIA

Print Profile(1)

Description

Comment & Rating (13)

This remix is based on

License

Related Models