Lian Li Dan A3 Vertical Stand

I made this stand to make my Lian Li Dan A3 case in vertical orientation for smaller footprint.

Note:

1. There are more parts to this design as I initially only plan to make the main body, but after printing it, i thought of making some vent to allow more air to go in instead of the one side only. So instead of re-designing and reprinting, i just design a stand-offs and use a super glue to stick them into the bottom.
2. You need to cut the main body. I used dovetail cut and put a super glue on the sides. If you decide to choose other cuts or connectors, you can use the stl file (main body.stl)
3. the stand-offs are named as they are suppose to stick. There is no label on the stl but you don't need to worry as they are all unique in size. You will be able to notice if you put on the wrong side.
4. If you don't want to use the 3mf, make sure you orient the stl properly. All files doesn't require support

PC setup: In-take is from the bottom using a cpu cooler.