A1 Adjustable Original Camera
Print Profile(11)
Description
This is my second upgrade to A1 3D printer.
I wanted to combine two features: the ability to adjust the camera and a look similar to the company's.
Assembly Instructions
- Print all 3 parts with supports
- Print camera cover https://makerworld.com/en/models/478855#profileId-392195
- Turn off printer
- Remove the camera according to the Bambu Lab instructions: https://wiki.bambulab.com/en/a1-mini/camera-replacement-guide
- Replace the camera with a cover
- Re-connect the camera cable
- Insert the camera into the cylinder
- Insert the cylinder into the body
- Insert the handle into the cylinder. The handle will keep the cylinder in place
- Install the module in place of the original cover. Press the latches carefully, paying special attention to the longest one.
- Attach the original cover
The housing slightly obscures the view of the camera. If it bothers you, then use Extended camera Profile.
Good Luck!
Boost Me (for free)
If you want to appreciate my work, you can give me a Boost, for which I will be very grateful. :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1823)