Audrey Hepburn
Print Profile(1)
Description
This was my second time using HueForge and I think the results came out great. I removed the TD values since I guessed and hoped that it would work out. I have a TD-1 on order.
The eSun Gray is more of a blue gray than an actual gray. This is the one that I used for this print
https://www.amazon.com/eSUN-Printing-Filament-Printer-Printers/dp/B0CX14VBQX
The Model is 185x227.93mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Overture Black
ePLA-SS eSun Gray
PLA Overture Matte Light Gray
PLA Overture White
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Light Gray
At layer #19 (1.6mm) swap to White for the rest.
Collection of my xTool models
https://makerworld.com/en/collections/19368938-psf-xtool
License
Comment & Rating (0)