Search models, users, collections, and posts

Garmin Venu 3/Instinct 2 USB-C charger dock/puck

PartyLime
Household>Office
IP Report

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.08mm layer, 2 walls, 30% infill
0.08mm layer, 2 walls, 30% infill
Designer
1.2 h
1 plate
4.6(15)
Open in Bambu Studio
Boost
74
183
15
5
281
162
Released 

Bill of Materials

Maker's Supply Kits and Parts
Select all
BT2x5 SHCS Self Tapping Screw (20PCS) - AA191
BT2 Socket Head Cap Self Tapping Screws (SHCS)
x2

Description

A charging puck for your Garmin Venu 3.

 

BoM:

1x Printed top

1x Printed bottom

2x BT2x5 self tapping screws (https://shorturl.at/pOuHN)

1x Garmin to USB-C adapter (https://shorturl.at/GV8mV)

garmin
garminvenu
venu 3
garmin venu 3
garmin venu
venu
watch
charger
usb-c
puck
dock

Comment & Rating (15)

(0/1000)
@MoriMotor
Print Profile
0.08mm layer, 2 walls, 30% infill
perfect print, had no screws so I used glue. works also well
profile
1
Reply
@dmazzotta
Print Profile
0.08mm layer, 2 walls, 30% infill
nice!
profile
1
Reply
@jusmoore
Boosted
Print Profile
0.08mm layer, 2 walls, 30% infill
didn’t have the 2x5 screws, but did have some 1.7x6 that worked just as well. nice little print.
profile
1
Reply
@BennyBoots
Print Profile
0.08mm layer, 2 walls, 30% infill
printed great! i used BL MATE PLA purple. just need to find some screws 👍🏻😀
(Edited)
0
Reply
@Cool_Steel
Print Profile
0.08mm layer, 2 walls, 30% infill
kool
profile
1
Reply
@user_4170264641
Print Profile
0.08mm layer, 2 walls, 30% infill
Works well, the top part could have a greater material thickness as it shines through in the middle. I also added two holes to the bottom in Bambu Studio to glue in magnets, so it doesn't slip on metal at the intended location. I also just glued the top part
Show original
profile
1
Reply
@adimg19
Print Profile
0.08mm layer, 2 walls, 30% infill
Nice
profile
1
Reply
@zev3569
Print Profile
0.08mm layer, 2 walls, 30% infill
sher
0
Reply
@PupsAndBrews
Print Profile
0.08mm layer, 2 walls, 30% infill
print failed
0
Reply
@user_2311640713
Boosted
Print Profile
0.08mm layer, 2 walls, 30% infill
profile
1
Reply

License

This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike

Related Models

Ständer / Halter für Meta Quest 3 / 3s und Quest 2
Stand / Holder for Meta Quest 3 / 3s and Quest 2
Dandandu
27.7 k
9.1 k
Phone Charge Port Dust and Lint Cleaning Tool
Phone Charge Port Dust and Lint Cleaning Tool
eclien
24.6 k
4.5 k
Garmin Instinct 2 / Venu 3 Watch Stand
Garmin Instinct 2 / Venu 3 Watch Stand
The Design and Engineering Hub
699
105
Cable Organizer / Snap Cable Clip - Print in place
Cable Organizer / Snap Cable Clip - Print in place
TuTu
30.4 k
8 k