ESP32S3 5" Display Case Guition JC8048B050N_I
Print Profile(2)
Description
Made a case for the 5 inch esp32 display.
- It's very easy to assemble as no screws are required, the back panel simply snaps on and is very secure. (this was printed with PLA)
- There is a hole for your usb c cable
- Very thin design to conserve filament, whilst remaining sturdy.
When you initially click in the front display to the case, it may require extra energy to put it in, this provides you with a clean front display, whilst not harming the device, this is also the matter with the back panel.
The back panel can be removed easily with your fingernails to push it up, whilst still providing a good hold to the case.
It can be double sided taped to the wall, and you are still able to remove the back panel to get to the display if you intend to reflash it, and it can be clicked back into place.
Can be printed with an a1 mini, by printing them individually.
This is the upgraded display to be used with the next xtouch update in a few months.
Display Aliexpress: https://vi.aliexpress.com/item/1005006715794302.html?channel=twinner
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)