Bass Player Framed Picture

Bass Player

Filament Painting

with white Frame, tiny Hole for Hanging included.

You can delete the hole in Bambu Studio (Objects/Cylinder/delete) if you don`t need it.

Original black and white Photo of a bass player on stage run through AI, then used some human finetuning.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 163.81x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.6mm and the Actual Depth is 3.7mm

Easy without AMS:

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Dark Blue
At layer #17 (1.44mm) swap to Orange
At layer #30 (2.48mm) swap to Ivory White for the rest.