Big Letter Beads (2 sets)

These oversized, two-sided letter beads are meant to stand out:) I designed two sets: one for vertical stringing and one for horizontal stringing. Perfect for making keychains, luggage tags, or chunky necklaces 😂

8/7/24 I added a new print profile for Flat (non-engraved) Big Letter Beads after receiving feedback that my original design didn't always print neatly (particularly the bottom side of the bead). I also changed the layer height to 0.20mm for this print profile:)

PLA works great

Layer Height 0.16mm

Infill 15%

No supports needed

Dimensions of beads: 1 inch diameter x ⅓ inch thick

Note: Beads can be scaled smaller (for longer names I scaled them down to 85% but you can go smaller)

Print Plate #1: Big Letter Beads for vertical stringing (two colors)

Print Plate #2: Big Letter Beads for horizontal stringing (two colors)

Other items you will need to make the keychains like the one in my photos:

• Elastic cord (1mm or 1.2mm thick recommended)
• Tassels
• Metal Keychain Clasp

Here is an Amazon link to this items if you need them:

https://amzn.to/3Ldu0FD

How to print: You can use the letters on the plate you need and delete the ones you don’t need but I like to keep the entire alphabet on each print plate and copy/paste the letters I need onto a third print plate.

How to assemble the keychains: Secure the elastic string or cord to the metal clasp and thread letters on. Stretch the elastic string to make it a little tight and then tie the tassel onto the end.

My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!