Syringe (Fully 3D Printed) - Free 3D Print Model

Search models, users, collections, and posts

EstimateStudios

Tools>Other Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Ironing - 0.2mm layer, 2 walls, 25% infill

Designer

37 min

1 plate

4.6(147)

Modified version, 2 colors, print by object, TPU tip

1.7 h

2 plates

5.0(4)

Open in Bambu Studio

Boost

567

1302

172

3.3 k

2.3 k

Released

Description

Introduction

A simple small, fully 3D Printed syringe for viscous materials. As the seal between the parts is not 100% tight, it is recommended to not use liquid materials. Possible use-cases are e.g. Epoxy Resin, Silicone, Liquid soap (may be to thin)…

Materials

Filament: Any (Hard) - PLA, PETG, ABS, ASA, …

Boost Me (for free)

Setup

Choose Color
Print
Fill the syringe with the material
Insert the Plunger
Done! Apply force to press out material

Let me know if there is anything to change! Have fun with it :)

Comment & Rating (172)

@Weiterovi

Boosted

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

In general design and printability is good. But unfortunately syringe doesn't work and can't take any water or any low density liquid. Also I didn't like that syringe is not easy to open because of unsufficient handle. So, I added TPU end and extend handle now it work as it should.

The profile uploader has replied

@PilotLennart

Hi, thanks for your reply :) As said in the description of the syringe, it is not 100% tight and therefore isn’t intended for water or other materials of low viscosity. But with all the feedback, i will soon release a second version.

(Edited)

@Weiterovi

Boosted

haha, so I'm sorry I didn't read it 🫣 Then my rating is 5* 😀

(Edited)

@jag_stampe3d

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

Printed without issues 👍

Show original

@LinoRod

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

printed fine but doesn’t work very well

@kleinotti

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

schöner Druck

@Rockstone

Boosted

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

Perfect

@Kflyer

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

@Opcdriver82

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

@user_3108275744

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

@cden13

Have you considered adding a TPU o-ring on the plunger? That could help with the seal for less viscous substances

The designer has replied

@PilotLennart

yes i thought about that but i explicitly wanted it in one material as I and many other people don’t have TPU. I am Currently working on a V2 without tpu but with a tighter seal.

@cden13

Replying to @PilotLennart :

Makes sense! I've just been experimenting with TPU and have noticed there don't seem to be many profiles utilizing PETG and TPU together and it seems like they'd be a great combo for your use case, however, if like you said most people don't use TPU, then it makes sense that these designs don't really exist atm.

@giraffe112358

Boosted

Print Profile

Ironing - 0.2mm layer, 2 walls, 25% infill

printed good. I upscaled one to 200% and used it for hole filler on my walls

@DaliCima

Friend, what material did you use for those holes? I want to see if it can be used to insert a tile nozzle

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

FULLY Printed Clicking Keycap Fidget

JoeyAW

14.8 k

3.7 k

GIF

Bear Trap (fully printable)

Ofally

8.3 k

3.3 k

MINI VAULT

Artur W.

7.3 k

4.2 k

Fully Printed Y-Splitter

QD3D

8.2 k

1.9 k