Perfect for keeping dust or little fingers out of electrical sockets.

Siam3D

Modified, 45° for strength, Side handles, Shorter Plugs

Good print but a little too tight of a fit in the oulets

ntcountrycreations

0.2mm layer, 2 walls, 15% infill

Daveheart

Great! Added a couple mods in a profile. 

menerso design

JDinKC

dethdeks

MountainMantis

user_3250875500

The prongs broke off in every outlet we used them in.  

jeffrudzinski.prestige

I’m new to printing and thought I chose the wrong filament.   Prongs break with ease.  

user_2318548043

Made these out of white PETG,  they work great.

credoagathos

I tried increasing the infill and using tougher filament but no matter what if we push them all the way in on the way out one of the prongs breaks. I think if the prongs were 1/2 the length, just enough to keep in the socket this would be 5 star

JamOut

djrethyk

cover

plate_1.png

plug.webp

Screenshot 2025-09-16 190917.png

IMG_2302.jpg

<p>Same settings as the original, but pushed the model down and tilted at a 45-degree angle for strength.  Shortened the plugs, because I felt they didn&#39;t need to be that long and it still sticks in the outlet.  Finally, added some handles on the sides because it was too slippery when pulling out the plug.   Great model!!</p>

Print Profile(2)

Description

Comment & Rating (68)

License

Remixes (1)

Related Models

outlet cover with thick base