Canon Rebel T6i (EOS 750D) Camera Cage
Print Profile(3)
Bill of Materials
Description
Edit: I added the cold shoe top for the cage.
This is a cage I did for my Canon Rebel T6i since nobody makes cage specifically for it. It might fit with other Canon Rebel cameras but I cannot certify it.
I printed it with PETG and it hold quite well. ABS and CF filament might also be a good option to print it. It has a lot of ¼-20 threaded screw holes and some ARRI 3/8-16 threaded holes with alignment pins. The bottom plate allows to open the battery door to replace it. Not seen on the pictures (I changed it after taking the pictures), the top has a ARRI 3/8 hole aligned with the hot shoe.
To assemble it, you need 8 M3 12mm screw but if possible, use 16mm on 7 out of 8 holes as there is one that, if longer than 12mm, will prevent the battery door from opening.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (27)